Analog DC to 1 MHz Link

The Math XA/RA-1000A system consist of the XA-1000A transmitter and the RA-1000A receiver. Both units feature operating controls that allow any analog wave shape with specific DC levels, to be accommodated without appreciable distortion over the entire operating bandwidth.
Technical Specifications

Complete System Bandwidth	DC-1MHz
Transmitter Input Impedance	10/50 ohms selectable
Maximum Input Voltage	3 volts pp (For Full Modulation)
Absolute Maximum Input Voltage	10 volts pp
Dynamic Range	70db Typical
Linearity	+/-2% Typical
Noise Floor(0 input, full BW)	1 millivolt rms typical
Maximum Output Voltage	3 volts pp
Output Load Impedance	50 ohms minimum
DC Offset	10 mv/degree C typical after 30 min. warmup
Allowable Transmission Loss 50u fiber 62.5u fiber 140u fiber	0-8db 0-10db 3-13db
Operating Wavelength	850nm
Optical Connectors	ST
Signal Connectors	BNC
Power Requierments	+/- 15 to +/- 25 VDC @ 250ma; +/- 14 to +/- 18 VDC RMS @ 250ma
Physical Size	2.55 x 4.75 x 1.3 in 6.5 x 12 x 3.3 cm
Operating Temperature	0 to 50 degree c
Part Number ST Transmitter	XA-1000A-1
Part Number ST Receiver	RA-1000A-1

For more information, contact:
Metrotek
Phone: (727) 547-8307
Fax: (727) 547-0687

E-mail: fiberoptics@metrotek.com

BACK: To Metrotek Links Page